Replace Refrigerator Water Supply Valve. A whirlpool refrigerator with an ice maker and water dispenser comes equipped with a dual inlet valve that allows water to feed from the supply line to the appliance. The valve supplies your refrigerator with water and ice, but if it is damaged, all of that water will leak out all over the floor.
Unplug the refrigerator from electric power or turn off the circuit breaker that controls the refrigerator. Take one of your towels and place it underneath to soak up any water that drips out after removal. Connect the refrigerator water line to the third outlet of the tee fitting.
This valve includes 1/4” tubing and. Once it’s pushed into place, tighten the nut over it. There is a very good chance that valve is soldered on to a 1/2 pipe.
Once you’ve reinstalled the water and everything in its place close the refrigerator door. Turn the knob or the way clockwise or perpendicular to the water pipe if you have a lever. A whirlpool refrigerator with an ice maker and water dispenser comes equipped with a dual inlet valve that allows water to feed from the supply line to the appliance.
This valve looks very similar to yours and it is a solder type valve. You may want to consult the owner's manual for specific water disconnection instructions. The valve supplies your refrigerator with water and ice, but if it is damaged, all of that water will leak out all over the floor.
Keep in mind, the team at mr. Unplug the refrigerator from electric power or turn off the circuit breaker that controls the refrigerator. Reconnect the blue water line and the cover.
Now that you have the necessary materials, begin to address the problem by locating the valve that connects the appliance to the copper water line. Place the free end of the tubing into a small bucket or sink and turn on the water supply. How do you replace a water valve in a refrigerator?
Comments
Post a Comment